How To Draw A One Eyed Criminal

It's very hard to draw eyes symmetrically, isn't it?
You may accept trouble drawing i eye well but not the other, or y'all may be worried that the left and right eyes are not balanced even though they should exist the same size.

In this article, I'd like to introduce a trick that allows you to describe both eyes at the same size!
It's a handy and quick technique that only digital engineering science tin provide, and then if you lot're a beginner or an experienced illustrator, accept a look!

Introduction

In this article, I'1000 going to utilise an illustration that has been pencilled in and cleaned upwardly to make the explanation easier to read, but I also recommend using this technique when you're doing preliminary drawings!
Yous can use information technology not only for optics, merely also when you lot want to draw arms and legs of the aforementioned length or breasts of the same size, and in many other situations where you lot are concerned about the balance betwixt left and right.

Frontal Face

First, draw the eye which is easier for yous to draw.
The fundamental point is to separate the layers of the eyelid and the pupil, which are the frames of the eyes.

Indistinguishable the eyelid layer by pressing the Duplicate icon at the lesser of the layer window.
In this case, I changed the color of the copied eyelid to brand it easier to see.

Select "Transform" from the "Pick" tab and select "Flip Left/Correct" from the menu at the lesser of the canvass to flip it.

Elevate the inverted eyelid to a symmetrical position and printing the OK button.

Duplicate, flip and movement the eye layer in the same way, and that's it.

When the eyelids and eyes are flipped together, the eyes can get unfocused and uncomfortable like this.
This is considering the optics are non in front of you lot, or the rest of the trunk is asymmetrical.
If the drawing is also tightly symmetrical, the manus-drawn epitome volition not look right, and then it is better to draw the image with some asymmetry.

Slanted Face up

If y'all don't accept a front face, duplicate the eyelid layer, flip it left and correct using the Transform tool, and then check the "Costless Transform" box in the Transform bill of fare to adjust the width.

Rotate information technology and then that it is parallel to i of the eyes, shrinking its width and adjusting its shape.

Duplicate, flip, and motion the pupil layer in the same manner, rotate it and so that it is parallel to 1 educatee, then shrink the width of the layer.

When yous adjust the shape, be careful not to change the meridian of the eyes besides much.
If you modify the peak also much, the size of the eyes will be uneven and unbalanced, and so brand modest adjustments to the height, mainly by changing the width and angle.

What did you think?
If yous utilize this technique, you can save a lot of time because y'all don't have to retrieve about the other parts once you lot have drawn one part.
Information technology may seem like a trivial task to duplicate parts, but it's a smashing technique used by professionals.
But it's a swell technique used past professionals.

(Text/Artwork/Mozukuni)

Source: https://medibangpaint.com/en/use/2020/10/technique-to-draw-the-eyes-symmetrically/

Posted by: alanizthates.blogspot.com

Share this post